We use cookies to give you the best experience. If you do nothing, we'll assume that's OK.

Limescale remover Impre IM 610 5 000ml

This product is a very effective limescale remover that is also gentle on surfaces. The remover can be used for glass, ceramics, chrome, stainless steel or aluminum. Consumption is between 10 - 20 m2/liter.

More details

Availability: In 3-5 working days

53,40 €

Limescale cleaner Impre IM 610 5 000ml

This innovative product has been developed for professional use. It is very gentle, while effectively cleaning, removing and restoring the surface of the material. The remover cleans deeply and can remove even the darkness of the surface.

 

The limescale remover is very effective even without scrubbing the substrate, there is no mechanical damage. The results are immediately visible. This product provides highly effective cleaning and removal of biological dirts, mineral, calcium and salt deposits, greases and adhering dirt (algae, insects, moss, etc.).

 

The product contains an extraordinarily high concentration of active solvents based on special strong surfactants and acids that provide highly effective cleaning and removal. Remover is based on safe ingredients (not containing salt, nitrates, formic acid). The advantage of the product is that it does not damage the rubber seals, as opposed to the usual removers. The limescale remover is excellent for cleaning the surface before applying nano protection.

Where can you use the limescale remover?

  • Toilets, washbasins, glazed surfaces
  • Glass and ceramic tiles in the bathroom
  • Water taps, stainless steel sinks, chrome accessories
  • Glass and plastic surfaces in the shower

 

In addition to these surfaces, the product is also intended for:

 

  • Stainless steel and aluminum
  • Removal of dirt from bricks, ceramic and mosaic tiles, granite, hard stone and other mineral materials
  • The product can also be partially used to remove rust stals

 

 

The difference between a conventional limescale cleaner and Limescale remover Impre IM 610

Conventional limescale cleaner:

 

  • One-purpose - for example, a ceramic remover will usually damage a metal battery
  • Damages rubber seals
  • Low concentration of active substances for lower prices

 

Limescale remover Impre 610:

 

  • High concentration of active substances - quick removal of all dirts
  • Without damage, it removes limescale from metals, plastics or ceramics
  • Due to the unique composition, it is completely gentle to gum

 

Granite sink before and after application of Limescale remover Impre IM 610

 

How to apply the product

Before application, remove dirt from the surface. The surface must be moistened before application. Apply the product and wash it from bottom to top. The duration of the action is individual and must be estimated by testing the product on a small area. The product is suitable for pre-treatment of the surface before application of nano protection. Conversely, we do not recommend using the product on a surface that has been treated with nano protection, as it reduces the shelf life.

 

Remover can be applied by paint, roller or spraying. The product should be applied evenly and proceed from the bottom up. Let it work for 1 - 30 minutes (we can use the brush, which will greatly increase the efficiency) and then thoroughly rinse with clean water. Let's dry out. If necessary, you can repeat the application. The limescale remover can be applied by hand, low pressure or even machine.

Write a review

Limescale remover Impre IM 610 5 000ml

Limescale remover Impre IM 610 5 000ml

This product is a very effective limescale remover that is also gentle on surfaces. The remover can be used for glass, ceramics, chrome, stainless steel or aluminum. Consumption is between 10 - 20 m2/liter.

Write a review

Other products in the same category: 13